2″ – 60″ / 60.3 – 1,524 mm
Mathey Dearman’s cage clamp is available in manual hand lever, ratchet, and hydraulic models in either tack or no-tack versions, ranging in sizes for pipes 2″–60″ / 60.3–1,524 mm. The cage clamps will align pipe through schedule 80.
Cage clamps are intended for alignment use only and are not designed to reform pipe. Each size clamp fits one specific pipe diameter. If the o/d of the pipe varies more than +/- 1/16″ / 5 mm from the indicated clamp diameter, pipes may not align accurately.
Ratchet Handles Available:
¾” (8″–42″)
1″ (10″–42″)
1¼” (14″)
| Model | Pipe Size |
|---|---|
01.0505.001 |
2″ – 60.3 mm |
01.0505.310 |
3″ – 88.9 mm |
01.0505.003 |
4″ – 101.6 mm |
01.0505.004 |
5″ – 114.3 mm |
01.0505.005 |
6″ – 168.3 mm |
01.0505.006 |
8″ – 219 mm |
01.0505.010 |
10″ – 273 mm |
01.0505.012 |
12″ – 323.8 mm |
01.0505.014 |
14″ – 355.6 mm |
01.0505.016 |
16″ – 406 mm |
01.0505.018 |
18″ – 457 mm |
01.0505.020 |
20″ – 508 mm |
01.0505.024 |
24″ – 610 mm |
01.0505.030 |
30″ – 762 mm |
01.0505.036 |
36″ – 914 mm |
01.0505.048 |
48″ – 1,219 mm |
01.0505.060 |
60″ – 1,524 mm |
Clamps with stainless steel contact points or for odd size pipe available on request. Add SS at end of part number for stainless steel.
No-tack cross bars are arched to permit a full-circle weld without removing the clamp. The no-tack clamp can help increase welding quality and efficiency.
Tack-type straight cross bars have flared ends so pipes can be moved easily into position and clamped. After the pipe is tack welded, the clamp is removed and the weld is completed.
Tack and no-tack cross bars are available in stainless steel for stainless and specialty alloy applications.
